Rock Hard RH-9002 Steering Stabilizer / Tie Rod Clamp for 1-3/4" OD Tie Rods
$79.58
Availability:
In stock
Our Part Number
RKHRH-9002
RH4X4 FEATURES:
- Rounded Skid Surface
- Black Powder Coat Finish
- 100% Bolt on Install
- All Hardware Included
- 100% Made in USA
- Lifetime Warranty
FINISH: Black Powder Coat
Rock Hard 4x4 is very proud to offer the heaviest duty steering stabilizer/tie rod clamp for the Jeep Wrangler JK 2/4DR 2007 - Current with 1-3/4" tie rods.
Fits Tie Rods with out Outer Diameter of 1-3/4"
Replace your embarrassingly weak and vulnerable factory steering stabilizer/tie rod clamp with our heavy duty CNC machined clamp.
Our clamp uses the same locking collar and camp theory as our world famous Sports Cage systems. Once secured to your tie rod our clamp will give you a lifetime of use. It's guaranteed to last longer than your tie rod!
NOTE: Not designed for factory steering stabilizer. This is designed for an aftermarket steering stabilizer with a 1/2" ID sleeve. The included grade-8 bolt is too large for factory steering stabilizer sleeve. You can press out that sleeve however and press in a 1/2" ID sleeve to use our clamp.
Deflecting Design
Unlike your factory clamp that acts like a rock catcher, our rounded clamp allows you to skid and slide over the obstacle. This prevents bent tie rods and worn ball joints. You are actually increasing the lifespan of your steering components with this simple upgrade.
The factory tie rod clamp is made from a thin plate that actually protrudes down past your tie rod. This allows it to catch on rocks and other trial debris. Hit hard enough or enough times and it will rotate out of position. This causes strain on your tie rod and steering stabilizer. Not to mention it's held in place by thin u-bolts that once bent after the mounting plate twists cannot be reused.
Fits Tie Rods with out Outer Diameter of 1-3/4"
Replace your embarrassingly weak and vulnerable factory steering stabilizer/tie rod clamp with our heavy duty CNC machined clamp.
Our clamp uses the same locking collar and camp theory as our world famous Sports Cage systems. Once secured to your tie rod our clamp will give you a lifetime of use. It's guaranteed to last longer than your tie rod!
NOTE: Not designed for factory steering stabilizer. This is designed for an aftermarket steering stabilizer with a 1/2" ID sleeve. The included grade-8 bolt is too large for factory steering stabilizer sleeve. You can press out that sleeve however and press in a 1/2" ID sleeve to use our clamp.
Deflecting Design
Unlike your factory clamp that acts like a rock catcher, our rounded clamp allows you to skid and slide over the obstacle. This prevents bent tie rods and worn ball joints. You are actually increasing the lifespan of your steering components with this simple upgrade.
The factory tie rod clamp is made from a thin plate that actually protrudes down past your tie rod. This allows it to catch on rocks and other trial debris. Hit hard enough or enough times and it will rotate out of position. This causes strain on your tie rod and steering stabilizer. Not to mention it's held in place by thin u-bolts that once bent after the mounting plate twists cannot be reused.
Strength
CNC machined from 1020 DOM (drawn over mandrel) means unstoppable strength. You aren't going to break this tie rod clamp
Ease of Installation
Simply unbolt your factory tie rod clamp, install ours in same location, tighten hardware, high-five your buddies.
What comes in every kit:
CNC machined from 1020 DOM (drawn over mandrel) means unstoppable strength. You aren't going to break this tie rod clamp
Ease of Installation
Simply unbolt your factory tie rod clamp, install ours in same location, tighten hardware, high-five your buddies.
What comes in every kit:
- Tie Rod / Steering Stabilizer Clamp
- Hardware
- Installation Instructions
- Deflecting design
- 1020 DOM Steel strength
- Installs in minutes
| Manufacturer's Part Number | RH-9002 |
|---|---|
| Manufacturer | Rock Hard |
| Warranty | Lifetime Warranty |
| Prop 65 | CALIFORNIA WARNING: Cancer and Reproductive Harm |
Write Your Own Review