In stock

PPE Stage3 Forged Tie Rod Assemblies; Fits 01-10 Duramax 6.6L

$257.73

These tie rods are overkill for some, but when it comes to steering components, failure is not an option.

These tie rod assemblies are the best of the best. Featuring 1.5" wide forged tie rod, massive 2 1/3" ball joints and a much larger and stronger, adjustable inner ball joint. Outer tie rod end contains a spring-loaded gusher bearing that maintains constant pressure.

When compared to factory components:30% larger toe adjusting shaft53% larger tie rod body35% larger outer ball joint28% larger, adjustable inner ball joint

Applications: 2001-2010 GM 2500/3500HD Trucks (158031500)

NOTICE: PPE Stage3 Tie Rods are engineered to fit GM stock steering components. Some aftermarket steering manufacturers have changed the placement of the tie rod mounting perch on the front spindle, which then requires a shorter tie rod. The Stage3 Tie Rod outers are fully-threaded internally, and may be trimmed to accommodate the relocated aftermarket perch location. An experienced installer should measure to determine the appropriate trim length.

More Information
Manufacturer's Part Number 158031500
Manufacturer PPE Performance
Prop 65 Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
Write Your Own Review
You're reviewing:PPE Stage3 Forged Tie Rod Assemblies; Fits 01-10 Duramax 6.6L

Disclaimer

Product packaging and material may contain more and/or different information from the website, including the product description, country of origin, and other information. Always read instructions and/or information provided with the product before using the product. For additional information about a product, please contact the manufacturer.

Warranty

If you have a product that needs warranty assistance please contact the manufacturer direct as they handle their own warranties.  All product warranties will be at the discretion of the manufaturerar