Synergy 8072-01 Weld-On Rear Track Bar Bracket; Fits Wrangler JK/JKU 07-18

Synergy Jeep JK Weld-On Rear Track Bar Bracket to replace the thin and weak factory bracket
Fits:

• 07-18 Jeep Wrangler JK
• 07-18 Jeep Wrangler Unlimited JK

Details:

• Synergy JK Weld-On Rear Track-Bar Bracket
• Weld-On rear track-bar bracket designed to replace the weak factory JK track bar bracket
• Replace the thin factory brackets on a stock axle or use for swapping any axle into a JK
• Multiple Track-bar holes for suspension adjustments
• Designed to fit stock JK axle tubes, 3.150 inch diameter
• Will fit other diameter axle tubes with minor trimming
• Track bar relocation bolt holes are 2.900 Inch 3.713 Inch and 4.525 inch above the stock track bar mounting location

Note:

• Requires the use of a minimum 3 inch bump stop spacer for clearance with the exhaust. When using a lower relocation bolt hole or aftermarket exhaust, a shorter bump stop spacer may be used7